Product Description

LT-4LDS-V1:

1. The optical power 20W module is the most powerful blue laser head on the market.

2. Cutting 10mm bass plywood by one pass.

3. With professional air assist.

4. Stable power output at long working time.

5. 56*56 housing size with excellent heat dissipation design.

6. Only 300~400mw power decrease with 100% power output in 30mins.

7. Easy for DIY connection

8.Built-in 4pcs 5W beam compressed laser diodes

Note:

Please ensure your engraving machinecan provide at least 24V 4A power supply. If not,please select LT-4LDS-V1-Kit A.

With air assist

When cutting with this laser head, the air assit system will blow air through the air nozzle. That will bring you excellent cutting experience and greatly reduce burned marks.

Recommend air pump: DC-30A 【24V】

Recommend air tube: inner diameter 4mm, outer diameter 6mm

Note:Please ensure that the air pump is turned on before you start cutting. If not, the smoke will contaminate the lens.

Excellent Heat Dissipation Design

1.Stable optical output power to keep stable cutting ability.

2.Effectively cool down to extend service lifeHigh Stable 2EDG3.81 Connector

Up to 7A Operating Current4-Beam Compressed Technology

Built-in 4pcs 5W beam compressed laser diodesWith air assist (clean-cut edges) VS no air assist (scorched edges)

Air assist for an excellent cutting experience and greatly reduced burn marks

4-Beam compressed technology (built-in 4pcs 5W beam compressed laser diodes)

Data reference for one cut of bass plywood, MDF, black acrylic

Materlal: 10mm bass plywood   Power: 100%        Speed: 3mm/s

Materlal: 8mm black acrylic       Power: 100%        Speed:50mm/min

Materlal; 5mm MDF                   Power: 100%        Speed: 3mm/sWith air assist (clean-cut edges) VS no air assist (scorched edges)

Air assist for an excellent cutting experience and greatly reduced burn marks
Laser head that can cut 0.08mm stainless steelHigh Precision Engraved Resolution 0.08mm

For engraving work: the focal point is at the surface of the material.New Protective Cover Design

With a laser protective cover, it can effectively filter blue light when engraving or cutting with this laser head.Excellent Heat Dissipation Design

1.Stable optical output power to keep stable cutting ability.

2.Effectively cool down to extend service life

Two Ways to use LT-80W-AA:

Way 1: with the air asssit nozzleThe laser head comes with a specially designed air assist nozzle. When cutting with this laser head, the air assit system will blow air through the air nozzle. That will bring you excellent cutting experience and greatly reduce burned marks.

Way 2：with the laser protective cover When engraving with this laser head, please use this protective cover that can effectively filter blue light. You can peform engraving without wearing laser goggles for convenience.

1. Optical power 10W blue laser head

2. Built-in 2pcs 5W beam compressed laser diodes

3. Cutting 8mm bass plywood by one pass.

4. With professional air assist.

5. Easy for DIY connection

LT-80W-AA(12V/24V)LT-80W-AA-KITA(12V/24V)